Ford Sierra

Ford Sierra
1.2. Car identification
2. Maintenance service
- 3. The general data
    3.1. Cars with petrol engines
   - 3.2. Cars with diesel engines
      - 3.2.1. Changes in a design of the car with 1988 to 1993
         3.2.1.1. The engine 2,3 дм3
         - 3.2.1.2. The engine 1,8 дм3
            3.2.1.2.1. Technical characteristics
            3.2.1.2.2. A head of the block of cylinders
            3.2.1.2.3. The block of cylinders
            3.2.1.2.4. The Krivoshipno-shatunnyj mechanism
            3.2.1.2.5. System timing
            3.2.1.2.6. Greasing system
            3.2.1.2.7. Cooling system
            3.2.1.2.8. Fuel system
            3.2.1.2.9. The tightening moments
            3.2.1.2.10. Engine adjustment
          3.2.1.3. Fuel system
          3.2.1.4. The repair which is not demanding removal of the engine
         3.2.1.5. Removal and engine installation
         3.2.1.6. Engine dismantling
         3.2.1.7. Check of details
         3.2.1.8. Check of backlashes of a cranked shaft and rods
         3.2.1.9. Engine assemblage
         3.2.1.10. Greasing system
         3.2.1.11. Cooling system
         3.2.1.12. Coupling
         3.2.1.13. A mechanical five-speed transmission of type МТ 75
         3.2.1.14. A power shaft and the back bridge
         3.2.1.15. Steering system
         3.2.1.16. A forward suspension bracket
         3.2.1.17. Brake system
         3.2.1.18. The electric equipment
         3.2.1.19. The general data
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment

3.2.1.2.3. The block of cylinders

THE GENERAL DATA

The block of cylinders of the engine

1 – the block of cylinders of the engine,
2 – a back cover,
3 – a sealing ring,
4 – a stopper plum of oil,
5 – a lining of the oil pallet,
6 – the oil pallet,
7 – заглушка a technological aperture of the block of cylinders,
8 – заглушка the oil channel,
9 – a stopper plum of a cooling liquid from the block of cylinders,
10 – a stopper closing an aperture for installation of a cranked shaft in ВМТ

The pig-iron block of cylinders has cylinders and nests of bearings of the cranked shaft, executed directly in its material. Contains five nests of radical bearings of a cranked shaft. Between the next cylinders in the block of cylinders there are channels for passage of a cooling liquid.

Designation of the block of cylinders: 89 FF 6015 AB.

Diameters of cylinders:

  – The nominal:

     • group And
82,500 – 82,515 mm

     • group In
82,515 – 82,530 mm

     • group With
82,660 – 82,675 mm

     • group D
82,675 – 82,690 mm

  – The repair:

0,5
83,000 – 83,015 mm

1,0
83,500 – 83,515 mm

Diameter of apertures of nests of loose leaves of radical bearings
53,683 – 53,696 mm