Ford Sierra


Ford Sierra
1.2. Car identification
2. Maintenance service
- 3. The general data
    3.1. Cars with petrol engines
   - 3.2. Cars with diesel engines
      - 3.2.1. Changes in a design of the car with 1988 to 1993
         3.2.1.1. The engine 2,3 дм3
          3.2.1.2. The engine 1,8 дм3
          3.2.1.3. Fuel system
          3.2.1.4. The repair which is not demanding removal of the engine
         3.2.1.5. Removal and engine installation
         3.2.1.6. Engine dismantling
         3.2.1.7. Check of details
         3.2.1.8. Check of backlashes of a cranked shaft and rods
         3.2.1.9. Engine assemblage
         3.2.1.10. Greasing system
         3.2.1.11. Cooling system
         3.2.1.12. Coupling
         3.2.1.13. A mechanical five-speed transmission of type МТ 75
         3.2.1.14. A power shaft and the back bridge
         3.2.1.15. Steering system
         3.2.1.16. A forward suspension bracket
         3.2.1.17. Brake system
         3.2.1.18. The electric equipment
         3.2.1.19. The general data
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment


Читаем на сайте: https://worldland24.ru

3.2.1.6. Engine dismantling
PERFORMANCE ORDER
1. To remove турбокомпрессор together with a final collector.
2. To merge from the engine oil.
3. To remove a leading part and a coupling disk.
4. To remove a flywheel from a cranked shaft.
5. To remove клиновой a belt of a drive of the pump of a cooling liquid.
6. To remove клиновой a belt of a drive of the generator.
7. To remove a head of the block of cylinders (subsection 3.2.1.4.2 see).
8. To block a cranked shaft and to unscrew a bolt of fastening of a pulley of a cranked shaft.
9. To remove a pulley from a cranked shaft.
10. To remove the fuel pump (subsection 3.2.1.3.3 see).
11. To remove the generator.
12. To remove the air filter.
13. To remove the oil pump.
14. To remove a pulley from an intermediate shaft.
15. To remove from an intermediate shaft a sealing ring.
16. To unscrew two bolts of fastening of a basic flange of an intermediate shaft and to take an intermediate shaft.
17. To remove the pump of a cooling liquid.
18. To remove the oil pallet.
19. To remove a pulley from a cranked shaft.
20. To remove a grid маслоприемника the oil pump.
21. To designate and remove covers of rods.
22. After a designation of rods to take them together with pistons from the block of cylinders of the engine.
23. To designate and remove covers of radical bearings.
24. To remove a cranked shaft.
25. To remove and designate loose leaves of radical bearings and persistent half rings of a cranked shaft.