Ford Sierra

Ford Sierra
1.2. Car identification
2. Maintenance service
- 3. The general data
    3.1. Cars with petrol engines
   - 3.2. Cars with diesel engines
      - 3.2.1. Changes in a design of the car with 1988 to 1993 The engine 2,3 дм3
 The engine 1,8 дм3
 Fuel system
 The repair which is not demanding removal of the engine Removal and engine installation Engine dismantling Check of details Check of backlashes of a cranked shaft and rods Engine assemblage Greasing system Cooling system Coupling A mechanical five-speed transmission of type МТ 75 A power shaft and the back bridge Steering system A forward suspension bracket Brake system The electric equipment The general data
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment Check of details

It is recommended to clear and wash up carefully details which will be used again. Extraction of stoppers and заглушек from the block of cylinders and a head of the block of cylinders considerably facilitates their washing. It is necessary to replace all linings and sealing rings at each dismantling of the engine.

Check of the sizes resulted in a technical characteristics, and their comparison with real values deal with a question, whether the detail can be used further, repaired or replaced with the new. The condition of their surface testifies to suitability of some details (a scratch, a bowl etc.) also.