Ford Sierra



Ford Sierra
1.2. Car identification
2. Maintenance service
- 3. The general data
   - 3.1. Cars with petrol engines
      3.1.1. Weights and transfer numbers
      3.1.2. Operational liquids
       3.1.3. Changes in a design of the car with 1984 to 1986
      - 3.1.4. Changes in a design of the car with 1987 to 1989
         3.1.4.1. Engine OHC
         - 3.1.4.2. Engine CVH 1,8 дм3
            - 3.1.4.2.1. Technical characteristics
               3.1.4.2.1.1. A head of the block of cylinders of the engine
               3.1.4.2.1.2. The block of cylinders of the engine
               3.1.4.2.1.3. The Krivoshipno-shatunnyj mechanism
               3.1.4.2.1.4. System timing
               3.1.4.2.1.5. Greasing system
               3.1.4.2.1.6. Cooling system
               3.1.4.2.1.7. Fuel system
               3.1.4.2.1.8. Ignition system
               3.1.4.2.1.9. The tightening moments
            3.1.4.2.2. Engine adjustment
            3.1.4.2.3. Ignition system
            3.1.4.2.4. System timing
            3.1.4.2.5. Assemblage of engine CVH 1,8 дм3
          3.1.4.3. Engine DOHC
          3.1.4.4. Service and repair
          3.1.4.5. Coupling
         3.1.4.6. A mechanical five-speed transmission of type
          3.1.4.7. A mechanical five-speed transmission of type МТ 75
         3.1.4.8. An automatic transmission
         3.1.4.9. A forward suspension bracket
          3.1.4.10. Brake system
          3.1.4.11. The electric equipment
         3.1.4.12. The general data
       3.1.5. Changes in a design of the car with 1990 till February, 1993
    3.2. Cars with diesel engines
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment


3.1.4.2.1.2. The block of cylinders of the engine
THE GENERAL DATA

The block of cylinders is cast from pig-iron. Cylinders are executed directly in the block of cylinders of the engine.

Nominal diameters of cylinders

The standard:
  – Group 1
79,940 – 79,950 mm
  – Group 2
79,950 – 79,960 mm
  – Group 3
79,960 – 79,970 mm
  – Group 4
79,970 – 79,980 mm
  – Group 5
79,980 – 79,990 mm
  – Group 6
79,990 – 80,000 mm
The increased:
  – Group And
80,000 – 80,010 mm
  – Group In
80,010 – 80,020 mm
  – Group With
80,020 – 80,030 mm

Repair diameters of cylinders: are increased by 0,290 or 0,500 mm.