Ford Sierra



Ford Sierra
1.2. Car identification
2. Maintenance service
- 3. The general data
   - 3.1. Cars with petrol engines
      3.1.1. Weights and transfer numbers
      3.1.2. Operational liquids
       3.1.3. Changes in a design of the car with 1984 to 1986
      - 3.1.4. Changes in a design of the car with 1987 to 1989
         3.1.4.1. Engine OHC
          3.1.4.2. Engine CVH 1,8 дм3
          3.1.4.3. Engine DOHC
          3.1.4.4. Service and repair
          3.1.4.5. Coupling
         3.1.4.6. A mechanical five-speed transmission of type
          3.1.4.7. A mechanical five-speed transmission of type МТ 75
         3.1.4.8. An automatic transmission
         3.1.4.9. A forward suspension bracket
          3.1.4.10. Brake system
          3.1.4.11. The electric equipment
         3.1.4.12. The general data
       3.1.5. Changes in a design of the car with 1990 till February, 1993
    3.2. Cars with diesel engines
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment


3.1.4.9. A forward suspension bracket
THE GENERAL DATA

Since April, 1987 values of installation of forward wheels are changed.
The changed values are resulted in the table (are measured in the car without loading).

Installation of forward wheels

Model
Suspension bracket type
Convergence in mm ()
Parametre
Corner of an advancing of a finger of a rotary fist
The admission
Angle of slope
The admission
Berlin and a sedan
Standart (standard)

Heavy Duty (strengthened)
Rating value 2 1 (020 ' 10 ')

Admissible value during time прверки-0,5 to 4,5 (-0,05 ' to 0,45 ')
150'

155'
-020'

005'
-120 ' до040'

-055 ' to 105'
Комби
Standart (standard)
150'
050 '/
320'
-020'
-120 ' до040'
Standart Nivomat (standard samourav -
нивающаяся Nivomat)
150'
-020'
-120 ' до040'
Heavy Duty (strengthened)
205'
105 ' до325'
005'
-055 ' to 105'
Heavy Duty Nivomat (strengthened samourav -
нивающаяся Nivomat)
150'
1 to 330'
005'
-055 ' to 105'
Business Car (polzova -
тельская)
150'
050 ' to 320'
-020'
-120 ' до040'

The prevention

Admissible difference between the right and left parties:

 – A corner of an advancing of a finger of a rotary fist: 1 ;
 – A wheel angle of slope: 115 '.


Since November, 1987 value of the moment of a tightening of a nut of a nave of a forward wheel to 350 Nanometers is changed.

Other information, concerning a technical characteristics, adjustment and repair of a forward suspension bracket is resulted in subsection 9.1 and subsection 3.1.3.18.