Ford Sierra



Ford Sierra
1.2. Car identification
2. Maintenance service
- 3. The general data
   - 3.1. Cars with petrol engines
      3.1.1. Weights and transfer numbers
      3.1.2. Operational liquids
       3.1.3. Changes in a design of the car with 1984 to 1986
      - 3.1.4. Changes in a design of the car with 1987 to 1989
         3.1.4.1. Engine OHC
          3.1.4.2. Engine CVH 1,8 дм3
          3.1.4.3. Engine DOHC
          3.1.4.4. Service and repair
          3.1.4.5. Coupling
         3.1.4.6. A mechanical five-speed transmission of type
         - 3.1.4.7. A mechanical five-speed transmission of type МТ 75
            3.1.4.7.1. Technical characteristics
            3.1.4.7.2. Removal and transmission installation
            3.1.4.7.3. Transmission dismantling
            3.1.4.7.4. Check and repair of details
            3.1.4.7.5. Transmission assemblage
         3.1.4.8. An automatic transmission
         3.1.4.9. A forward suspension bracket
          3.1.4.10. Brake system
          3.1.4.11. The electric equipment
         3.1.4.12. The general data
       3.1.5. Changes in a design of the car with 1990 till February, 1993
    3.2. Cars with diesel engines
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment



3.1.4.7. A mechanical five-speed transmission of type МТ 75

3.1.4.7.1. Technical characteristics
THE GENERAL DATA

The transmission – three-total, a classical design also has five synchronised transfers for advance (4th transfer a straight line) and not synchronised transfer of a backing. It is established along the car behind the engine. The gear change lever is located on a floor.

TRANSFER NUMBERS

The cars equipped with the engine 2,0 дм3 with injection of fuel

Transfer
Transfer number
Transfer number of the main transfer
Full transfer number
1
3,89
3,92
15,248
2
2,08
3,92
8,153
3
1,34
3,92
5,252
4
1,00
3,92
3,920
5
0,82
3,92
3,214
Backing
3,51
3,92
13,759

The cars equipped with the engine 1,8 дм3 and 2,0 дм3 with the carburettor

Transfer
Transfer number
Transfer number of the main transfer
Full transfer number
1
3,89
3,14
12,214
2
2,08
3,14
6,531
3
1,34
3,14
4,207
4
1,00
3,14
3,140
5
0,82
3,14
2,574
Backing
3,51
3,14
11,021

Greasing

Quantity of oil: 1,25 дм3.

Type: oil for transmissions Ford ESD M2C 186-A.

Periodicity of service: level check each 20 000 km of run of the car or time in a year, oil replacement is not provided.

The tightening moments

Carter of a transmission to картеру couplings
20 – 27 Nanometers
Carter of coupling to the block of cylinders of the engine
29 – 41 Nanometers
Fastening of the directing plug выжимного the coupling bearing
15 – 17 Nanometers
Holder of the bearing of an intermediate shaft:
  – 1st stage
15 – 20 Nanometers
  – 2nd stage
To weaken fastening on 60 °
Fastening of a nut of the bearing
9 – 11 Nanometers
Fastening of an axis of transfer of a backing to картеру
8 – 11 Nanometers
Bolt of a stopper of transfer of a backing to картеру transmissions
18 – 25 Nanometers
Nut of an intermediate shaft
200 Nanometers
Stopper of a clamp of the selector
20 – 27 Nanometers
Stopper of an aperture of filling and oil plum
23 – 32 Nanometers
Fastening of a sealing ring of the ball bearing of a secondary shaft
20 – 27 Nanometers
The switch of fires of a backing
10 – 14 Nanometers