Ford Sierra

Ford Sierra
1.2. Car identification
2. Maintenance service
- 3. The general data
   - 3.1. Cars with petrol engines
      3.1.1. Weights and transfer numbers
      3.1.2. Operational liquids
      - 3.1.3. Changes in a design of the car with 1984 to 1986 The engine A head of the block of cylinders The block of cylinders of the engine The Krivoshipno-shatunnyj mechanism A cranked shaft System timing An engine mount Cooling system
 The carburettor System of injection of fuel Ignition system Coupling A mechanical four-speed transmission A mechanical five-speed transmission
 Automatic transmission Ford A 4 LD A power shaft and the back bridge System of a steering with the hydraulic booster A forward suspension bracket A back suspension bracket Brake system
 The electric equipment The general data
       3.1.4. Changes in a design of the car with 1987 to 1989
       3.1.5. Changes in a design of the car with 1990 till February, 1993
    3.2. Cars with diesel engines
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment A mechanical four-speed transmission

Bolts Torx

And – a bolt with head Torx (an external six-coal asterisk),

In – a bolt with nest Torx (an internal six-coal asterisk)


Nave of the synchronizer of transfers 3–4

Since January, 1983 (a code of date of manufacturing "DC") in mechanical transmissions of type With naves of the synchronizer of transfers 3–4 new types are applied. This change is entered for elimination of vibrations of a ring of the synchronizer, arising in not included synchronizer. The entered change does not influence a method of dismantling and the transmission assemblage, resulted in subsection 6.1.5.

Fastening back картера

Since March, 1983 (the code of date of manufacturing "DD") back картер transmissions of type With fastens by means of bolts with a head of type Torx.

In the course of unscrewing and a tightening of these bolts necessarily use of corresponding tools (Torx E12) these bolts adapted for heads. Use of the inappropriate tool will cause damage of a head of a bolt.

Other information, concerning a technical characteristics, adjustment and repair of a mechanical four-speed transmission, is resulted in subsection 6.1.