Ford Sierra



Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
4. Engines
5. Coupling
6. Transmissions
- 7. A kardannyj shaft and the back bridge
   7.1. Technical characteristics
   7.2. Removal and installation карданного a shaft
   7.3. Repair of the intermediate bearing
   7.4. Removal and installation of the back bridge
   7.5. Dismantling and assemblage of the back bridge
   7.6. Dismantling and differential assemblage
   7.7. Adjustment of bearings of gear wheels of the main transfer
   7.8. Adjustment of gear wheels of the main transfer
   7.9. Assemblage and adjustment of the main transfer
   7.10. Replacement of a sealing ring of a gear wheel of the main transfer
   - 7.11. Semiaxes
      7.11.1. Removal and installation
      7.11.2. Dismantling and assemblage
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment


7.11. Semiaxes

7.11.1. Removal and installation

Removal

PERFORMANCE ORDER
1. To lift the car and to remove a back wheel from the corresponding party.
2. To remove a brake drum.
3. To unscrew a nut of fastening and to remove a flange of a nave by means of a corresponding stripper.
4. To unscrew nuts of fastening of a nave of a wheel to the lever of a back suspension bracket.
5. To remove a nave of a wheel and to disconnect bearing brake board.
6. To attach bearing brake board two bolts to the lever of a back suspension bracket.
7. To take полуось.

The prevention

Three-humeral hinges of a semiaxis cannot be turned one concerning another on a corner more than 13 as it breaks their working capacity.


Installation

PERFORMANCE ORDER
1. To insert the semiaxis end in шлицевое an aperture of a box of differential.
2. To attach a nave of a wheel and bearing brake board to the lever of a back suspension bracket.
3. To insert four bolts of fastening, a casing of the hinge and new collars of fastening of a casing.
4. To establish a flange of a nave of a wheel and to screw up a nut of fastening of a nave without a definitive tightening.
5. To establish a brake drum and a back wheel.
6. To lower the car and to tighten the corresponding moments a nut of a nave of a back wheel, and also a nut of bolts of fastening of a wheel.