Ford Sierra


Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
4. Engines
5. Coupling
6. Transmissions
- 7. A kardannyj shaft and the back bridge
   7.1. Technical characteristics
   7.2. Removal and installation карданного a shaft
   7.3. Repair of the intermediate bearing
   7.4. Removal and installation of the back bridge
   7.5. Dismantling and assemblage of the back bridge
   7.6. Dismantling and differential assemblage
   7.7. Adjustment of bearings of gear wheels of the main transfer
   7.8. Adjustment of gear wheels of the main transfer
   7.9. Assemblage and adjustment of the main transfer
   7.10. Replacement of a sealing ring of a gear wheel of the main transfer
    7.11. Semiaxes
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment



7.10. Replacement of a sealing ring of a gear wheel of the main transfer

Replacement without removal of the back bridge

PERFORMANCE ORDER
1. To lift the car.
2. To disconnect propeller a shaft from a flange of a gear wheel of the main transfer and to suspend a shaft to a body.
3. By means of the adaptation 15.030 to unscrew nuts of fastening of a flange of a gear wheel of the main transfer.
4. To remove a flange from a gear wheel of the main transfer by means of a corresponding stripper.
5. To take a sealing ring of a gear wheel by means of the adaptation 15.072.
6. To establish a new sealing ring by means of the adaptation 15.047 And (not to wipe factory greasing from a sealing edge of a ring).
7. To establish a flange on a gear wheel of the main transfer, to put on a nut of fastening of a flange and to tighten it by means of the adaptation 15.030.
8. To attach propeller a shaft to a flange of a gear wheel of the main transfer.