Ford Sierra


Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
4. Engines
5. Coupling
6. Transmissions
- 7. A kardannyj shaft and the back bridge
   7.1. Technical characteristics
   7.2. Removal and installation карданного a shaft
   7.3. Repair of the intermediate bearing
   7.4. Removal and installation of the back bridge
   7.5. Dismantling and assemblage of the back bridge
   7.6. Dismantling and differential assemblage
   7.7. Adjustment of bearings of gear wheels of the main transfer
   7.8. Adjustment of gear wheels of the main transfer
   7.9. Assemblage and adjustment of the main transfer
   7.10. Replacement of a sealing ring of a gear wheel of the main transfer
    7.11. Semiaxes
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment



7.4. Removal and installation of the back bridge
THE GENERAL DATA

The back bridge

 And – the remote plug,

In – a lining,

With – a flange of adjustment of a backlash of the main transfer

The back bridge
1 – картер,
2 – bearings of differential,
3 – a leading gear wheel of main transfer,
4 – a conducted gear wheel of main transfer,
5 – a cover картера the back bridge,
6 – a box of differential,
7 – semiaxial gear wheels,
8 – саттелиты,
9 – a type-setting lining, 		10 – a nut of the bearing of a leading gear wheel,
11 – a flange of a leading gear wheel for connection with the back hinge карданного a shaft,
12 – a nut of a flange,
13 – a sealing ring,
14 – a blocking flange,
15 – the holder of the bearing,
16 – a compensatory washer

Removal

PERFORMANCE ORDER
1. To lift the car.
2. To remove back wheels.
3. To remove brake drums.
4. To remove naves of wheels and a semiaxis (the corresponding description in subsection 7.11.1 see).
5. To remove bearing brake boards.
6. To remove propeller a shaft (subsection 7.2 see).
7. To prop up the back bridge by means of a jack.
8. To disconnect an element of back fastening of the bridge to a body.
9. To disconnect elements of forward fastening of the bridge to a beam of a back axis (1 – bolts of a flange of the hinge, 2 – fastening bolts катрера the back bridge).
10. To take the back bridge.

Installation

PERFORMANCE ORDER

To execute actions in return sequence in relation to removal process. After installation it is necessary to check up oil level in картере the back bridge.