Ford Sierra



Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
4. Engines
5. Coupling
6. Transmissions
- 7. A kardannyj shaft and the back bridge
   7.1. Technical characteristics
   7.2. Removal and installation карданного a shaft
   7.3. Repair of the intermediate bearing
   7.4. Removal and installation of the back bridge
   7.5. Dismantling and assemblage of the back bridge
   7.6. Dismantling and differential assemblage
   7.7. Adjustment of bearings of gear wheels of the main transfer
   7.8. Adjustment of gear wheels of the main transfer
   7.9. Assemblage and adjustment of the main transfer
   7.10. Replacement of a sealing ring of a gear wheel of the main transfer
    7.11. Semiaxes
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment


7.5. Dismantling and assemblage of the back bridge
PERFORMANCE ORDER
1. To arrange the back bridge on the corresponding holder (the adaptation 15.070).
2. To unscrew bolts Torx of fastening of a cover of the back bridge, to uncover and merge from картера oil.
3. To remove plates adjustments of a backlash of bearings of differential fixing a flange. To designate their position.  
4. To remove flanges (8, fig. the Back bridge) adjustments of a backlash of bearings see, and also a differential box (a key 15.071).
5. To unscrew a nut of fastening of a flange to a gear wheel of the main transfer (the adaptation 15.040).
6. By means of a corresponding universal stripper to remove a flange from a gear wheel.
7. To unscrew a nut of fastening of bearings of a gear wheel of the main transfer (the adaptation 15.073 and накидной the bent key of 36 mm).
8. To take a gear wheel of the main transfer, the conic bearing and the remote plug.