Ford Sierra


Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
- 4. Engines
    4.1. Petrol engines
   - 4.2. The diesel engine
       4.2.1. Technical characteristics
      4.2.2. Check and adjustment of backlashes of valves
       4.2.3. Fuel system
       4.2.4. Atomizers
      4.2.5. Candles накаливания
      4.2.6. Compression check
      4.2.7. Removal of air from fuel system
      4.2.8. The fuel filter
      4.2.9. The fuel pump, installation of the beginning of injection of fuel
      4.2.10. Adjustment of number of turns of idling
      - 4.2.11. The repair which is not demanding removal of the engine
          4.2.11.1. A head of the block of cylinders
         4.2.11.2. Removal and engine installation
         - 4.2.11.3. Dismantling, repair and engine assemblage
            4.2.11.3.1. Installation of the back radical bearing
            4.2.11.3.2. Assemblage of knot the piston-rod
            4.2.11.3.3. Assemblage of a drive of system timing
            4.2.11.3.4. The further assemblage of the engine
          4.2.11.4. Greasing system
          4.2.11.5. Cooling system
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment



4.2.11.3.3. Assemblage of a drive of system timing
THE GENERAL DATA

System timing
1 – a casing приводной system chains timing,
2 – a lining of a casing,
3 – an intermediate plate,
4 – a lining of a plate,
5 – an asterisk of a cam-shaft,
6 – a system chain timing,
7 – an asterisk of the tension device of a chain,
8 – the ball bearing,
9 – the clown,
10 – the plug,
11 – a toddler,
12 – an axis of levers of valves,
13 – the holder of an axis of levers of valves,
14 – the lever of the valve,
15 – the holder of blocking of an axis of levers of valves, 		16 – an adjusting spring of an axis of levers of valves,
17 – flat washers,
18 – a pusher,
19 – a core of a pusher,
20 – the final valve,
21 – the inlet valve,
22 – crackers of fastening of a basic plate of a spring of the valve,
23 – the top basic plate of a spring of the valve,
24 – a spring of the valve,
25 – the bottom basic plate of a spring of the valve,
26 – a sealant of a core of the valve
PERFORMANCE ORDER
1. To establish (the party with an adjusting sign (1) outside) a chain asterisk together with шпонкой on a cranked shaft.
2. To establish a flange of the holder of an asterisk of a drive of the fuel pump together with the pipeline of giving of oil.
3. To establish the tension device приводной system chains timing.
4. To establish an asterisk of a drive of the fuel pump and to turn a cranked shaft so that the piston in 1st cylinder was in ВМТ.

5. To establish приводную a system chain timing so that its designations of red colour coincided with signs on asterisks of a cam-shaft and the fuel pump, and a designation of white colour – with signs on an asterisk of a cranked shaft.
6. To establish an asterisk of the tension device of a chain together with the clown and to pull a chain so that to receive a backlash of 0,5-1 mm between a cheek of the tension device and its holder. To tighten a roller of the tension device.
7. To replace a sealing ring of a casing приводной system chains timing and to screw a casing.