Ford Sierra



Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
- 4. Engines
    4.1. Petrol engines
   - 4.2. The diesel engine
       4.2.1. Technical characteristics
      4.2.2. Check and adjustment of backlashes of valves
       4.2.3. Fuel system
       4.2.4. Atomizers
      4.2.5. Candles накаливания
      4.2.6. Compression check
      4.2.7. Removal of air from fuel system
      4.2.8. The fuel filter
      4.2.9. The fuel pump, installation of the beginning of injection of fuel
      4.2.10. Adjustment of number of turns of idling
      - 4.2.11. The repair which is not demanding removal of the engine
          4.2.11.1. A head of the block of cylinders
         4.2.11.2. Removal and engine installation
          4.2.11.3. Dismantling, repair and engine assemblage
          4.2.11.4. Greasing system
         - 4.2.11.5. Cooling system
            4.2.11.5.1. Plums of a liquid from cooling system
            4.2.11.5.2. Filling of system and air removal
            4.2.11.5.3. The fan
            4.2.11.5.4. The thermostat
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment


4.2.11.5. Cooling system

4.2.11.5.1. Plums of a liquid from cooling system
THE GENERAL DATA

Cooling system

1 – the pump of a cooling liquid,
2 – a casing of a radiator,
3 – the thermostat,
4 – a cover of the thermostat,
5 – the gauge of temperature of a cooling liquid,
6 – a pulley of a drive of the pump of a cooling liquid,
7 – клиновой a belt,
8 – a roller of the tension device клинового a belt,
9 – a pulley of a cranked shaft,
10 – клиновые belts of a drive of the fan and the generator,

13 – the fan,
14 – an axis of the fan,
15 – a pulley of the generator,
16 – a brush,
17 – a radiator,
18 – the gauge of temperature of a cooling liquid,
19 – a broad tank,
20 – the gauge of level of a cooling liquid

Plums of a liquid from cooling system

PERFORMANCE ORDER
1. To unscrew a stopper of pouring of a liquid in a broad tank.
2. To establish a control lever of temperature of system of heating of salon on the maximum temperature.
3. To unscrew a stopper plum of a cooling liquid on a radiator (it is specified by an arrow).
4. To unscrew a stopper plum of a cooling liquid on the right side in a back part of the block of cylinders of the engine (it is specified by an arrow).
5. Under these stoppers it is necessary to substitute corresponding capacities and to wait yet the cooling liquid will not flow down.