Ford Sierra



Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
- 4. Engines
    4.1. Petrol engines
   - 4.2. The diesel engine
       4.2.1. Technical characteristics
      4.2.2. Check and adjustment of backlashes of valves
       4.2.3. Fuel system
       4.2.4. Atomizers
      4.2.5. Candles накаливания
      4.2.6. Compression check
      4.2.7. Removal of air from fuel system
      4.2.8. The fuel filter
      4.2.9. The fuel pump, installation of the beginning of injection of fuel
      4.2.10. Adjustment of number of turns of idling
       4.2.11. The repair which is not demanding removal of the engine
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment


Історія появи коктейлю "текіла бум", рецепт і склад, спосіб застосування

4.2.8. The fuel filter
THE GENERAL DATA

Knot of the fuel filter

1 – the holder of the filter,

2 – a replaced element of the filter,

3 – a sediment bowl,

4 – the manual fuel pump

System of injection of fuel

1 – the fuel pump,
2 – the electromagnetic valve of deenergizing of the engine (valve STOP),
3 – the holder of elements of management,
4 – a closing stopper,
5 – a bolt муфты the pipeline of giving of fuel,
6 – муфта returnable топливопровода,
7 – pipelines of giving of fuel,
8 – returnable топливопроводы atomizers,
9 – the case of an atomizer,
10 – a spray

Filter replacement

PERFORMANCE ORDER
1. The replaced element of the filter (2 – fig. Knot of the fuel filter see) is clamped between the holder of the filter (1) and a sediment bowl (3).
2. To unscrew a bolt (V – fig. Removal of air from fuel system see) sediment bowl fastenings to the holder of the filter.
3. To disconnect a sediment bowl (3 – fig. Knot of the fuel filter see) and a replaced element (2) fuel filters.
4. To establish a new replaced element on a sediment bowl and to move up to the holder of the filter.
5. Cautiously to screw up a bolt (V – fig. Removal of air from fuel system see) sediment bowl fastenings to the holder of the filter.
6. To check up tightness of connections of the fuel filter.

Removal of water from a sediment bowl

PERFORMANCE ORDER
1. To substitute under the fuel filter capacity, to weaken a drain bolt () and a bolt of fastening of the pipeline of tap of fuel from the filter (C – a sediment bowl).
2. To tighten both bolts after water will cease to follow.