Ford Sierra

Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
- 9. Suspension brackets
   - 9.1. A forward suspension bracket
      9.1.1. Technical characteristics
      9.1.2. Removal and installation of a rack of a forward suspension bracket
      9.1.3. Dismantling and assemblage of a rack of a suspension bracket
      9.1.4. Removal and stabilizer installation
      9.1.5. Replacement of the metallo-rubber plug of the lever
      9.1.6. Removal and installation of a rotary fist
      9.1.7. Check of installation of forward wheels
      9.1.8. Replacement of bearings of a nave of a forward wheel
    9.2. A back suspension bracket
10. Brake system
11. A body
12. An electric equipment

9.1.7. Check of installation of forward wheels

Convergence installation

1. To check up pressure in wheels and a condition of protectors of tyres of all wheels.
2. To check up a condition of disks of wheels.
3. To check up, whether is not present люфта in шарнирных connections of elements of a suspension bracket and steering system.
4. To establish a steering wheel in position for advance.
5. By means of the adaptation for measurement of installation of wheels to check up values of characteristic corners of installation of forward wheels (subsection 9.1.1 see)
6. In case of need to adjust a convergence of wheels by rotation of steering draughts. The maximum difference between length of both steering draughts (right and left) cannot exceed 5 mm.