Ford Sierra



Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
- 9. Suspension brackets
   - 9.1. A forward suspension bracket
      9.1.1. Technical characteristics
      9.1.2. Removal and installation of a rack of a forward suspension bracket
      9.1.3. Dismantling and assemblage of a rack of a suspension bracket
      9.1.4. Removal and stabilizer installation
      9.1.5. Replacement of the metallo-rubber plug of the lever
      9.1.6. Removal and installation of a rotary fist
      9.1.7. Check of installation of forward wheels
      9.1.8. Replacement of bearings of a nave of a forward wheel
    9.2. A back suspension bracket
10. Brake system
11. A body
12. An electric equipment


продажа домов в гринфилде

9.1.3. Dismantling and assemblage of a rack of a suspension bracket
PERFORMANCE ORDER
1. To remove a suspension bracket rack.
2. To clamp the bottom part of a rack of a suspension bracket in a vice.
3. To establish the adaptation 14.021 for compression of springs and to compress a suspension bracket spring.
4. To unscrew a nut of fastening of a basic lining of a rack of a suspension bracket, blocking a rod of the shock-absorber a key for шестигранных nests of 6 mm.
5. To take a basic lining, the basic bearing, the top basic plate of a spring, a rubber casing, and also the compressed spring together with the adaptation.
6. To remove the rubber buffer from a shock-absorber rod.
7. To check up a condition of details and cleanliness of basic plates of a spring.

Assemblage

PERFORMANCE ORDER
To collect a suspension bracket rack, carrying out actions in return sequence in relation to removal process. To pay attention to correct installation of a spring in basic plates.