Ford Sierra



Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
- 8. A steering
   8.1. Technical characteristics
   8.2. Removal and installation of steering transfer
   8.3. Dismantling and assemblage of steering transfer
   8.4. Removal and installation of a steering column
   8.5. Dismantling and steering wheel assemblage
   - 8.6. A steering with the hydraulic booster
      8.6.1. Technical characteristics
      8.6.2. Removal and installation of steering transfer
      8.6.3. Removal and installation of the hydraulic pump
      8.6.4. Dismantling and assemblage of steering transfer CAM GEAR
      8.6.5. Dismantling and assemblage of steering transfer ZF
      8.6.6. Removal and installation of a steering column
      8.6.7. Dismantling and steering wheel assemblage
      8.6.8. Removal of air from steering system
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment


8.6.1. Technical characteristics
THE GENERAL DATA

Transfer number:
  – Transfer Cam Gear
19,88
  – Transfer ZF
16,77
Number of turns of a steering wheel (from an emphasis against the stop):
  – Transfer Cam Gear
3,58
  – Transfer ZF
3,50
Diameter of a turn
10 m
Backlash between a pusher and a cover of the case gear рейки (transfer Cam Gear)
0,025 – 0,125 mm
Thickness of linings of adjustment of a backlash реечной transfers
0,055 – 0,127 mm
Klinovye belts of a drive of the hydraulic amplifier
Two with a designation 83 HF 6 B 30 IBA or 83 HF 8 A 615 AA
Tension
400 – 500 Nanometers (a new belt) or 300 – 400 Nanometers (a belt which was in the use).

The tightening moments

Fastening of steering transfer to a body cross-beam
1st stage – 15 Nanometers;
2nd stage – to tighten on 90
The spherical hinge of steering bent for to a rotary fist
25 – 30 Nanometers
Flange of the elastic hinge to приводной to a gear wheel of steering transfer
20 – 25 Nanometers
Cover приводной gear wheels
17 – 24 Nanometers
Pusher cover to the case of steering transfer:
  – Cam Gear
22 – 24 Nanometers
  – ZF
7 – 8 Nanometers
Connections of hydraulic pipelines
20 – 27 Nanometers
The returnable pipeline to the pump
26 – 31 Nanometers
The forcing pipeline to the pump
16,4 – 20,5 Nanometers
Steering bent for gear рейке
70 – 77 Nanometers
Counternut on steering draught
57 – 68 Nanometers
The case gear рейки to the case приводной gear wheels of transfer ZF
120 – 130 Nanometers
Flange крестового the hinge to a steering wheel shaft
20 – 25 Nanometers
The top holder of a steering column
45 – 55 Nanometers
Steering wheel nut
45 – 55 Nanometers
Wheel nut
100 Nanometers