Ford Sierra



Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
- 8. A steering
   8.1. Technical characteristics
   8.2. Removal and installation of steering transfer
   8.3. Dismantling and assemblage of steering transfer
   8.4. Removal and installation of a steering column
   8.5. Dismantling and steering wheel assemblage
    8.6. A steering with the hydraulic booster
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment



8.1. Technical characteristics
THE GENERAL DATA

Transfer number
19,88
Number of turns of a steering wheel (from an emphasis against the stop)
4,15
Diameter of a turn
10 m
Backlash between a pusher and a cover of the case gear рейки
0,015 – 0,150 mm
Thickness of linings of adjustment of a backlash реечной transfers
0,06; 0,40; 0,52; 0,64; 0,76; 0,88; 1,00 mm
The moment of resistance during turn of a wheel of steering transfer
0,3 – 0,13 Nanometers

The tightening moments

Fastening of the case of steering transfer to a body cross-beam
1st stage – 15 Nanometers;
2nd stage – to tighten on 90
The spherical hinge of steering bent for to a rotary fist
25 – 30 Nanometers
Flange of the elastic hinge to steering transfer
20 – 25 Nanometers
Cover приводной gear wheels
17 – 24 Nanometers
Pusher cover to the case of steering transfer
6 – 9 Nanometers
Steering bent for gear рейке
75 – 85 Nanometers
Hinge flange to a steering wheel shaft
20 – 25 Nanometers.
The top holder of a steering column
45 55 Nanometers
Steering wheel nut
45 – 55 Nanometers
Wheel nut
100 Nanometers