Ford Sierra

Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
- 4. Engines
    4.1. Petrol engines
   - 4.2. The diesel engine
       4.2.1. Technical characteristics
      4.2.2. Check and adjustment of backlashes of valves
       4.2.3. Fuel system
       4.2.4. Atomizers
      4.2.5. Candles накаливания
      4.2.6. Compression check
      4.2.7. Removal of air from fuel system
      4.2.8. The fuel filter
      4.2.9. The fuel pump, installation of the beginning of injection of fuel
      4.2.10. Adjustment of number of turns of idling
      - 4.2.11. The repair which is not demanding removal of the engine
          4.2.11.1. A head of the block of cylinders
         4.2.11.2. Removal and engine installation
          4.2.11.3. Dismantling, repair and engine assemblage
          4.2.11.4. Greasing system
         - 4.2.11.5. Cooling system
            4.2.11.5.1. Plums of a liquid from cooling system
            4.2.11.5.2. Filling of system and air removal
            4.2.11.5.3. The fan
            4.2.11.5.4. The thermostat
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment

4.2.11.5.2. Filling of system and air removal

THE GENERAL DATA

The prevention
Removal of air from cooling system occurs automatically after engine start.

PERFORMANCE ORDER

1. To screw up stoppers plum of a cooling liquid in the block of cylinders and a radiator.

2. To check up fastening of elastic pipelines of system of cooling.

3. To fill system with a cooling liquid through a jellied aperture of a broad tank to level with a designation "MOVE" on a tank and to screw up a stopper.

4. To start the engine and to keep its number of turns within 1000–1500 rpm before opening of the thermostat of system of cooling.

5. To check up liquid level in a broad tank which should be between signs "MIN" and "MOVE"