Ford Sierra

Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
- 4. Engines
   - 4.1. Petrol engines
       4.1.1. Technical characteristics
      4.1.2. Adjustment of backlashes of valves
       4.1.3. Ignition system
       4.1.4. Fuel system
       4.1.5. The repair which is not demanding removal of the engine
      4.1.6. Removal and engine installation
      4.1.7. Engine dismantling
      4.1.8. Identification of co-operating parts
      4.1.9. Engine assemblage
      4.1.10. Replacement of pistons
      4.1.11. Removal and installation of an intermediate shaft
      4.1.12. System timing
      4.1.13. Greasing system
      - 4.1.14. Cooling system Plums of a liquid and filling of system of cooling Removal and radiator installation Removal and fan installation The pump охладжающей liquids Thermostat replacement
      4.1.15. A suspension bracket of the power unit
      4.1.16. System of release of the fulfilled gases
    4.2. The diesel engine
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment Removal and radiator installation

Cooling system

1 – a radiator,
2 – a broad tank,
3 – the pump of a cooling liquid,
4 case of the thermostat,
5 – the thermostat,
6 – elastic pipelines


1. To disconnect from the accumulator a wire of weight and to merge cooling liquid from cooling system.
2. To disconnect the electric wires connecting system of cooling with the engine.
3. To disconnect the elastic pipeline from a broad tank.
4. In the cars equipped with an automatic transmission to disconnect elastic pipelines from a radiator of oil of an automatic transmission.
5. To remove an internal casing of a radiator.
6. To unscrew bolts of the top fastening a radiator.
7. To raise the car, to unscrew bolts of the bottom fastening of a radiator and to take it.


1. For radiator installation it is necessary to execute actions in return sequence in relation to process of its removal.
2. After installation of pipelines of system of cooling it is necessary to fill system with a cooling liquid and to remove from it air.
3. In the cars equipped with an automatic transmission, it is necessary to check up in addition oil level in a transmission.