Ford Sierra

Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
- 9. Suspension brackets
    9.1. A forward suspension bracket
   - 9.2. A back suspension bracket
      9.2.1. Technical characteristics
      9.2.2. Shock-absorber replacement
      9.2.3. Replacement of a spring of a suspension bracket
      9.2.4. Removal and installation of the lever of a suspension bracket
      9.2.5. Replacement of the metallo-rubber plug of a beam of a suspension bracket
      9.2.6. Replacement of bearings of a nave of a back wheel
10. Brake system
11. A body
12. An electric equipment

9.2.5. Replacement of the metallo-rubber plug of a beam of a suspension bracket

THE GENERAL DATA

Fastening of the metallo-rubber plug of a beam of a back axis

1 – bolts of fastening,

2 – clamps

PERFORMANCE ORDER

1. To lift and fix a back part of the car.

2. To unscrew 3 bolts of fastening to a body of a metal plate of the metallo-rubber plug of a beam of a back axis.

3. By means of the corresponding lever leaning about the lever of a suspension bracket, and by means of the adaptation 15.014 to take the metallo-rubber plug from a nest of a beam of a back axis.

4. To grease the new metallo-rubber plug with glycerine or equivalent lubricant means.

5. By means of the adaptation 15.017 to establish the metallo-rubber plug together with a lining and a nut in a nest of a beam of a back axis.

6. To remove the adaptation and to take the lever.

7. To establish a metal plate on the plug and to screw three bolts of fastening of the metallo-rubber plug on a beam of a back axis (one bolt with fixing) and to a body (two bolts).