Ford Sierra



Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
- 9. Suspension brackets
    9.1. A forward suspension bracket
   - 9.2. A back suspension bracket
      9.2.1. Technical characteristics
      9.2.2. Shock-absorber replacement
      9.2.3. Replacement of a spring of a suspension bracket
      9.2.4. Removal and installation of the lever of a suspension bracket
      9.2.5. Replacement of the metallo-rubber plug of a beam of a suspension bracket
      9.2.6. Replacement of bearings of a nave of a back wheel
10. Brake system
11. A body
12. An electric equipment


9.2.2. Shock-absorber replacement
THE GENERAL DATA

Back suspension bracket

1 – a beam of a back axis,
2 – the slanting lever,
3 – the shock-absorber,
4 – a spring of a suspension bracket,
5 – the case of bearings of a nave of a wheel,
6 – conic bearings,
7 – a sealing ring,
8 – the metallo-rubber plug of a beam,
9 – the metallo-rubber plug of the lever

PERFORMANCE ORDER
1. To unhook a fragment of a covering of a luggage carrier (a berlin body) or to incline forward a back of back sitting and to unscrew in front a covering of the bottom of a luggage carrier (a body комби) and also to remove a casing of the top fastening of the shock-absorber.
2. To lift and fix the car.
3. By means of the corresponding lift to prop up the lever through a wooden lining.
4. To unscrew a bolt of the top fastening of the shock-absorber (in cars with a berlin body, on a photo) or to unscrew a nut of the top fastening of the shock-absorber, holding simultaneously a rod of the shock-absorber with a key for internal шестигранников (in cars with a body комби).
5. To unscrew a bolt of the bottom fastening of the shock-absorber (in cars with a berlin body) or to unscrew a nut of the bottom fastening of the shock-absorber (in cars with a body комби) and to take the shock-absorber downwards.
6. For shock-absorber installation to execute actions in return sequence in relation to removal process.