The technical characteristics is resulted in subsection 6.1.1 and subsection 6.2.1.
The gear change scheme
The gear change lever is located on a car floor. The transmission, depending on the version, has four or five synchronised transfers for advance and one not synchronised transfer for movement back.
Inclusion of a reverse gear demands lever moving against the stop to the left, its cave-in downwards (for protection from casual inclusion) and its movings forward.
Check of level of oil
|
|
Level of oil which should be on 5 mm below a jellied aperture (N), it is necessary to check each 20 000 km of run of the car and in case of need to supplement its quantity.
|
|