Ford Sierra


Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
11. A body
- 12. An electric equipment
   12.1. Technical characteristics
   12.2. The relay and safety locks
   12.3. Removal and generator installation
   12.4. Dismantling and generator assemblage
   12.5. Tension adjustment клинового a belt
   12.6. A starter
   12.7. A windscreen screen wiper, knot of indexes and a headlight
   12.8. Removal and installation of a combination of devices
   12.9. Adjustment of light of headlights
    12.10. Heating and ventilation system
    12.11. Electroschemes



12.7. A windscreen screen wiper, knot of indexes and a headlight
THE GENERAL DATA

Windscreen screen wiper

 
1 – the engine,
2 – the holder,
3 – draughts,
4 – axes of levers of screen wipers,
5 – the lever of a screen wiper,
6 – a brush

Removal of the engine of a screen wiper
PERFORMANCE ORDER
1. To include a screen wiper and at the moment of occurrence of a nut of fastening of a crank on an engine shaft to switch off ignition or to remove a wire of weight from the accumulator plug.
2. To unscrew a nut of fastening of a crank (2) on a shaft of the engine and to remove it. To unscrew three bolts (1) fastenings of the engine of a screen wiper to an arm.
3. To take the engine of a screen wiper and to disconnect a socket of electric wires.

Installation of the engine of a screen wiper
PERFORMANCE ORDER
1. To connect a socket of electric wires to the screen wiper engine.
2. To insert the engine of a screen wiper and to tighten bolts of fastening of the engine of a screen wiper to an arm.
3. To establish a crank of the lever mechanism on an axis of the engine and to check up, whether the crank ledge has entered into deepening of an axis of the engine.
4. To tighten a nut of fastening of a crank to an engine axis.
5. To connect a weight wire to the accumulator (if has been removed) or to include ignition and to check up correctness of functioning of a screen wiper of a windscreen.

Removal and installation of the lever mechanism of a screen wiper
PERFORMANCE ORDER
1. To disconnect a wire of weight from the accumulator
2. To reject upwards a plastic protective cap of the lever of a screen wiper, to unscrew a fastening nut, to remove a washer and the screen wiper lever together with a brush (fig. a windscreen Screen wiper see).
3. To repeat the described actions for the second lever of a screen wiper.
4. To lift a cowl, to disconnect pipelines of giving of a liquid to atomizers of a washer of a windscreen and to unscrew on one bolt on both ends of a lattice of giving of air in a body.
5. To close a cowl and to unscrew eight bolts after removal of plastic casings.
6. To remove a lattice of giving of air in a body.
7. To unscrew seven bolts of fastening of the holder of the lever mechanism of a screen wiper of a windscreen (cтрелками position of seven bolts of fastening is shown).
8. To take the holder together with the engine of a screen wiper and the lever mechanism.
9. To disconnect electric wires from the engine.
The prevention

Draughts of the mechanism are connected to its cranks by means of spherical nylon fingers. Fingers should be taken cautiously by means of the lever, and to insert after a covering graphite greasing.
10. For installation of the lever mechanism it is necessary to execute actions in return sequence in relation to removal process.