Ford Sierra

Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
- 10. Brake system
   10.1. Technical characteristics
   - 10.2. Forward brakes
      10.2.1. Replacement brake колодок
      10.2.2. Support replacement
      10.2.3. Replacement of a brake disk
      10.2.4. Support repair
    10.3. Back brakes
   10.4. Removal and installation of the main brake cylinder
   10.5. Removal of air from brake system
   10.6. Adjustment of a manual brake
11. A body
12. An electric equipment

10.2.3. Replacement of a brake disk

The prevention

Disks of both forward brakes should have an identical thickness and a surface condition, only then both wheels will be braked simultaneously. Therefore it is recommended to replace simultaneously both disks.


1. To remove brake колодки (subsection 10.2.1 see).
2. In cars with the engine 2,0 дм3 to suspend a support to a body by means of a wire to protect a brake hose from damage.
3. To unscrew the holder of a support from a rotary fist of a wheel.
4. To unscrew the screw of fastening of a brake disk from a nave of a wheel and to remove a brake disk.


1. To establish a brake disk and to screw up the screw of its fastening to a wheel nave.
2. To screw the holder of a support on a rotary fist of a wheel.
3. To establish brake колодки (subsection 10.2.1 see) and a support (subsection 10.2.2 see).
4. To establish wheels, to lower the car and to tighten nuts of fastening of wheels.
5. Some times strongly to press a brake pedal to result in contact brake колодки with a brake disk.