Ford Sierra



Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
- 10. Brake system
   10.1. Technical characteristics
    10.2. Forward brakes
    10.3. Back brakes
   10.4. Removal and installation of the main brake cylinder
   10.5. Removal of air from brake system
   10.6. Adjustment of a manual brake
11. A body
12. An electric equipment


10.4. Removal and installation of the main brake cylinder
THE GENERAL DATA

The main brake cylinder and the vacuum amplifier of brakes

1 – the case of the main cylinder,

2 – a tank of a brake liquid,

3 – linings,

4 – a lock ring,

5 – the vacuum amplifier,

6 – a rod,

7 – the vacuum amplifier,

8 – a rod,

9 – the vacuum pipeline

Removal

PERFORMANCE ORDER
1. To remove from a tank, for example, by means of a syringe as it is possible большее quantity of a brake liquid.
2. To disconnect from the main brake cylinder hydraulic pipelines.
3. To disconnect the vacuum amplifier from the main brake cylinder after unscrewing of two nuts of fastening.
4. To take the main brake cylinder.

Installation

PERFORMANCE ORDER
1. To remove from a tank, for example, by means of a syringe as it is possible большее quantity of a brake liquid.
2. To disconnect from the main brake cylinder hydraulic pipelines.
3. To disconnect the vacuum amplifier from the main brake cylinder after unscrewing of two nuts of fastening.
4. To take the main brake cylinder.