Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
- 10. Brake system
10.1. Technical characteristics
10.2. Forward brakes
10.3. Back brakes
10.4. Removal and installation of the main brake cylinder
10.5. Removal of air from brake system
10.6. Adjustment of a manual brake
11. A body
12. An electric equipment
|
Manual brake
|
1 – the lever of a manual brake,
2 – a protective casing,
3 – a crossbeam,
|
4 – a cable,
5 – an adjusting nut with a counternut |
Adjustment of a manual brake
|
|
1 – the basic plug of a manual brake,
2 – a cable of a manual brake
|
| PERFORMANCE ORDER |
| 1. To lift and fix a back part of the car. |
| 2. At the released lever of a manual brake some times to press a pedal of a brake and to check up, whether correctly the mechanism of automatic adjustment of a backlash has established a backlash колодок. |
| 3. To check up an axial backlash of control cores in the basic plugs located on the ends of cables on bearing brake boards (fig. Adjustment of a manual brake see) which should make 0,5–1,0 mm. |
| 4. In case of need it is necessary to execute adjustment of working length of a cable of a manual brake by means of a plastic regulating nut 5 (fig. the Manual brake see), located about a power shaft, after unscrewing of its counternut. After adjustment it is necessary to tighten a counternut of a regulating nut before occurrence of 2-4 characteristic cracklings. |
| 5. To check up functioning of a manual brake. |
| 6. To lower the car. |
|
|
|