Ford Sierra


Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
4. Engines
- 5. Coupling
   5.1. Technical characteristics
   5.2. Removal and coupling installation
   5.3. Replacement of the needle bearing
   5.4. Replacement of a cable of coupling
   5.5. The mechanism of a pedal of coupling
   5.6. Replacement of a pedal of coupling
   5.7. The vyzhimnoj bearing of coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment



5.4. Replacement of a cable of coupling

Removal

PERFORMANCE ORDER
1. To establish the car over a viewing hole or to lift it on the lift.
2. To remove a casing of plugs of deenergizing of coupling from картера couplings after removal of a spring hook.
3. To remove a stopper of a ratchet from gear sector, having enclosed corresponding wooden брусок under a coupling pedal.
4. To disconnect the end of a cable from plugs of deenergizing of coupling, moving its end downwards, and then forward.
5. To remove the left part of an upholstery about pedals.
6. To unhook a cable from a pedal with gear sector and to move it through an aperture between a pedal and gear sector.
7. To extend a cable through an aperture of a forward partition in a motor compartment.

Installation

PERFORMANCE ORDER
1. To insert a cable through an aperture in a forward partition from outside a motor compartment, to spend it between a pedal of coupling and gear sector and to hook on its end on this sector.
2. To pull a cable forward to extend it from a cover and to hook on its other end on plugs of deenergizing of coupling.
3. To fix a rubber casing together with a spring hook on картере couplings.
4. To take wooden брусок from under a coupling pedal.
5. To establish into place earlier removed upholstery about pedals.
6. To lower the car.