Ford Sierra

Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
4. Engines
- 5. Coupling
   5.1. Technical characteristics
   5.2. Removal and coupling installation
   5.3. Replacement of the needle bearing
   5.4. Replacement of a cable of coupling
   5.5. The mechanism of a pedal of coupling
   5.6. Replacement of a pedal of coupling
   5.7. The vyzhimnoj bearing of coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment

5.2. Removal and coupling installation


1. To remove a transmission.
2. To unscrew пореременно crosswise bolts of fastening of a leading part of coupling to a flywheel, blocking a screw-driver a gear wreath of a flywheel.
3. To remove a leading part and a coupling disk.
4. To disconnect a returnable spring from plugs of deenergizing of coupling.
5. To extend plugs of deenergizing of coupling from their nest and to take them together with выжимным the bearing.
6. To separate выжимной the bearing and plugs of deenergizing of coupling.


1. To establish картер couplings on картере transmissions, tightening bolts of its fastening by the corresponding moment.
2. By means of the corresponding plug to establish on a press a new ring on выжимной the bearing.
3. To grease graphite or молибденовой (МОS2) with greasing a sliding surface выжимного the bearing and its plug directing.
4. To establish the bearing on the plug.
5. To press the end of plugs into their nest so that the elastic terminations have clasped a spherical pin.
6. To hook on a returnable spring on plugs of deenergizing of coupling.
7. To be convinced that the elastic terminations of plugs compress a spherical pin.
8. To establish a disk of coupling by the smooth party in a flywheel direction. To insert aligning core 21.044 into apertures of a disk of coupling and a flywheel.
9. To establish a leading part of coupling and to tighten its bolts alternately crosswise corresponding moment.