Ford Sierra



Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
4. Engines
- 5. Coupling
   5.1. Technical characteristics
   5.2. Removal and coupling installation
   5.3. Replacement of the needle bearing
   5.4. Replacement of a cable of coupling
   5.5. The mechanism of a pedal of coupling
   5.6. Replacement of a pedal of coupling
   5.7. The vyzhimnoj bearing of coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment



5.1. Technical characteristics
THE GENERAL DATA

In cars with a mechanical transmission the one-disk dry coupling operated mechanically by means of a cable is used. The leading part of coupling has the central disk spring. The coupling disk has гаситель крутильных fluctuations with screw springs. The vyzhimnoj bearing – ball. Free wheeling adjustment automatic also occurs by means of the ratchet mechanism located about a pedal of coupling.

Key parametres

The engine
1,3 and 1,6 дм3
2,0 дм3
Mark of coupling
LUK or AP
Fichtel and Sachs, Laycock or LUK
Mark and type of overlays
Mintex H 26/1 or Ferodo 1F 324
External diameter of overlays (mm)
190
216
Internal diameter of overlays (mm)
136
153
Thickness of overlays (mm)
3,850 ± 1
Number of springs гасителя крутильных fluctuations of a disk of coupling
4
6

The tightening moments

Carter of coupling to the block of cylinders of the engine
40 – 51 Nanometers
Leading part of coupling to a flywheel
20 – 25 Nanometers
Flywheel to a cranked shaft of the engine
64 – 70 Nanometers