Ford Sierra

Ford Sierra
1.2. Car identification
2. Maintenance service
3. The general data
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
- 11. A body
   11.1. Care of a body
   - 11.2. Body elements
      11.2.1. A cowl cable
      11.2.2. Cowl adjustments
      - 11.2.3. Doors
         11.2.3.1. An internal upholstery of a door
         11.2.3.2. Adjustment of closing of the lock of a door
         11.2.3.3. The internal door handle
         11.2.3.4. The cylinder of the lock of a door
         11.2.3.5. The door lock
         11.2.3.6. Forward sitting
12. An electric equipment

11.2.3.4. The cylinder of the lock of a door

THE GENERAL DATA

Fastening of the cylinder of the lock

1 – the cylinder of the lock,

2 – fixing скоба

Removal

PERFORMANCE ORDER

1. To remove an internal upholstery of a door and condensing film over the lock cylinder.

2. To remove fixing скобу, shifting it aside.

3. Partially to put forward from a door the lock cylinder, to turn upwards and to disconnect the plastic lever (2) (fig. the Mechanism of closing of a door see) from draught of the cylinder of the lock.

4. Completely to get the lock cylinder.

Installation

Installation is made in sequence of return to removal. It is necessary to pay attention to correct placing of consolidation, and fixing скобу to establish under the first ledge of the cylinder of the lock.

As spare parts cylinders of locks with the plastic lever, but without the plug (3) (fig. the Mechanism of closing of a door see) are delivered.

Before installation of the new cylinder of the lock it is necessary to insert the plug into the lever or on the cylinder to establish the old lever and to fix its lock ring.