Ford Sierra



Ford Sierra
1.2. Car identification
2. Maintenance service
- 3. The general data
   - 3.1. Cars with petrol engines
      3.1.1. Weights and transfer numbers
      3.1.2. Operational liquids
       3.1.3. Changes in a design of the car with 1984 to 1986
      - 3.1.4. Changes in a design of the car with 1987 to 1989
         3.1.4.1. Engine OHC
          3.1.4.2. Engine CVH 1,8 дм3
         - 3.1.4.3. Engine DOHC
            - 3.1.4.3.1. Technical characteristics
               3.1.4.3.1.1. A head of the block of cylinders of the engine
               3.1.4.3.1.2. The block of cylinders of the engine
               3.1.4.3.1.3. The Krivoshipno-shatunnyj mechanism
               3.1.4.3.1.4. System timing
               3.1.4.3.1.5. Greasing system
               3.1.4.3.1.6. Cooling system
               3.1.4.3.1.7. Fuel system
               3.1.4.3.1.8. Ignition system
               3.1.4.3.1.9. The tightening moments
          3.1.4.4. Service and repair
          3.1.4.5. Coupling
         3.1.4.6. A mechanical five-speed transmission of type
          3.1.4.7. A mechanical five-speed transmission of type МТ 75
         3.1.4.8. An automatic transmission
         3.1.4.9. A forward suspension bracket
          3.1.4.10. Brake system
          3.1.4.11. The electric equipment
         3.1.4.12. The general data
       3.1.5. Changes in a design of the car with 1990 till February, 1993
    3.2. Cars with diesel engines
4. Engines
5. Coupling
6. Transmissions
7. A kardannyj shaft and the back bridge
8. A steering
9. Suspension brackets
10. Brake system
11. A body
12. An electric equipment



3.1.4.3.1.2. The block of cylinders of the engine
THE GENERAL DATA

The block of cylinders is cast from pig-iron, has cylinders executed directly in the block of cylinders and five radical bearings of a cranked shaft.

Designation (it is executed in casting)
20
Nominal diameters of cylinders
The standard:
  – Group 1
86,000 – 86,010 mm
  – Group 2
86,010 – 86,020 mm
Increased 0,15:
  – Group And
86,150 – 86,100 mm
  – Group In
86,160 – 86,170 mm
Increased 0,5
86,500 – 86,510 mm
Width of a nest of the loose leaf of the average radical bearing
21,17 – 21,23 mm
Diameters of nests of radical bearings:
  – The nominal
59,287 – 59,300 mm
  – Increased 0,4
59,687 – 59,700 mm