Sitting lobbies
Adjustment of forward sitting
|
1 – the lever of longitudinal adjustment
|
2 – the handle of adjustment of an inclination of a back |
LONGITUDINAL ADJUSTMENT
| PERFORMANCE ORDER |
|
|
1. To extend the lever (1) longitudinal adjustments located under sitting from outside of an axis of symmetry of the car and to adhere of it in this position. In some versions of equipment of cars there is a possibility of regulation of height of sitting of the driver turn of the handle (3) in the bottom part of sitting from outside doors. For sitting lifting it is necessary to turn the handle counter-clockwise, and for lowering – clockwise. |
| 2. To move sitting before the chosen position is longitudinal and to release the lever of longitudinal adjustment. |
| 3. To move sitting it is a little forward and back before blocking of forward sitting. |
|
ADJUSTMENT OF THE INCLINATION OF THE BACK OF THE SEAT
|
|
The angle of slope of a back of sitting can be changed turn of the handle (2) located in the bottom of a back from outside of doors. |
ADJUSTMENT OF THE BEND OF THE SUPPORT OF THE WAIST
|
|
In some versions of equipment of cars adjustment of a bend of a support of a waist by turn of the handle (4) located on an inside of a support is possible. |
Back sitting
FOLDING OF NOT DIVIDED BACK
| PERFORMANCE ORDER |
|
|
1. To lift two buttons located on each side of a back. |
| 2. To incline a back forward. |
|
FOLDING OF THE DIVIDED BACK
| PERFORMANCE ORDER |
| Cars with a berlin body |
|
|
1. To lift the button which is behind backs that to a part which should be combined. |
| |
2. To combine the unblocked part of a back forward. |
| Cars with a body the Sedan |
| 1. To open a luggage carrier. |
|
2. To pull for the unblocking button cоответствующей back parts (рычажок unblockings it is accessible from within a luggage carrier.). |
| 3. To combine a corresponding part of a back forward. |
|
FOLDING OF BACK SITTING
| PERFORMANCE ORDER |
| To pull for a tape which is in a back part of sitting, to raise and turn sitting forward. |
|
Folding of a back shelf
| PERFORMANCE ORDER |
| 1. For extraction of a back shelf (only two volume bodies) it is necessary to unhook draughts from hooks in a back door. |
| 2. To take from directing to an axis of turn of a shelf. |
|
Headrests
For change of height of a headrest it is necessary to move it in a corresponding direction.
|
|
Extraction of a headrest demands pressing of the button which are about the right directing. |
|